LX-D5

Classification:

Automobile painting/paint room consists of painting/paint room, hot air generator, electric control cabinet and other parts. When painting, the two main fans suck in fresh air from the air inlet, first pass through the first dust filter to filter out large particles of dust in the air, and then enter the air chamber at the top of the paint booth, and the air flows through the top filter quilt. Clean and evenly flow downward from the top, forming a wind curtain around the vehicle. Then, the cotton is used to filter out the paint mist and impurities in the painting process, and the air duct is discharged from the floor to the outside. Always maintain a positive pressure in the barn to prevent dust from entering the room.

Key words:

Catalytic combustion equipment | spray paint room | RTO catalytic combustion equipment

Hotline:

0531-83543888/83383888

Online consultation

Related Products

Detailed introduction

Graphic Details

LX-D2

Model:LX-D5
Function:Car spray paint
Specifications:Non-standard customization
Features:Energy saving and environmental protection type

LX-D2

LX-D5
Outside size		7000×5200×3400mm(L×W×H)			Inside size	6900×3900×2650mm(L×W×H)
Entrance door		Three doors, 3000x2600 mm (W×H), equipped with 3 sheet metal doors without edging, made of steel plate with "Longxiang" special protective film and built-in framework, beautiful and durable, square self-locking, aluminum alloy edging Super-large tempered glass observation window, luxury giant latch for sheet metal door, square tube guide column, aluminum alloy hinge; special sealing strip for sealing groove box;
Emergency door		6502000mm(WH), high-strength aluminum alloy profile-wrapped door, equipped with a super-large tempered glass observation window, and equipped with a pressure lock to prevent the pressure in the room from exceeding the normal value and damage the barn, safe and durable.
Main system
Cabin system	Wall panel		The wall board adopts a socket -type flame retardant EPS composite board, and the "Longxiang" special protective film is covered with the outer side to improve the anti -corrosion and rust resistance capacity, extend the service life of 50mm, inside and outside Δ0.45mm color steel plate; EPS foam, which weighs 10 kg. The top plate of the room is bent with a thickness of 0.6mm galvanized steel plate, and the fire prevention effect is excellent. The border of the room is made of galvanized steel plate. The surface is high -temperature powder coating.
	Basement		The platform is made of galvanized steel plate laser-cut and assembled with galvanized square tubes. The height is 280mm. The installation is standardized and durable. There are five ground grids in the middle, which are reasonable in structure and durable. The fixed-length steel plate ground grid is 30×5 flat steel to ensure load-bearing, and it is galvanized and anti-rust. 3 sets of ramps, made of 9702000mm (WL) fully sealed tread plate, powder coating with anti-rust treatment, and welded reinforcement ribs at the bottom of the tread plate; the staff can operate comfortably.
Ventilation system	Inlet fan		1*7.5kw YDW series double-inlet centrifugal fan, each air volume: 20000m³/h, small size, large air volume, low noise, low vibration; heat and moisture resistance, durable.
	Outlet fan		1*7.5kw YDW series double-inlet centrifugal fan, each air volume: 20000m³/h, small size, large air volume, low noise, low vibration; heat and moisture resistance, durable.
	Cabinet setting type		The fan box is made of sprayed profiles and steel plates with a protective film, which improves the anti-corrosion and rust resistance and prolongs the service life; the fan box and the main room are of an isolated structure, which greatly reduces the vibration and noise of the room body; Meet the air intake and exhaust needs of the barn; the high-position air supply unit greatly improves the air supply efficiency of the fan; the exhaust pipe is made of galvanized sheet common plate flange air pipe made of professional equipment, which is durable; standard configuration 2-section air duct 1 One elbow, single section size 700700910mm square.
	Air speed		On-load wind speed: 0.4m/s; ventilation times: 315time/h.
Heating system	Electric heating		Infrared heating system, 10 groups of *3KW far-infrared baking lamps, high temperature resistant connecting wires, 6cm wide wire groove, strong heat dissipation. Maximum working temperature: 80°C, heating rate (20-80°C): 15-20min.
Lighting system	Ceiling lights		8 groups * 4 * 16w LED high-efficiency energy-saving lamp tubes, galvanized plate spray-painted light box shell, 3C quality certified toughened glass high-transmittance panel. Lamp horizontal, illuminance: ≥800LUX
	Side lights		5 groups * 4 pieces of 16w LED high-efficiency energy-saving lamp tubes, galvanized plate spray-painted light box shell, 3C quality certified toughened glass high-transmittance panel. Longitudinal light tube, illuminance: ≥800LUX
Filtering system	Primary filter		G2 grade, filtering effect > 83%, produced by Italian technology, effectively captures dust particles larger than 10um.
	Ceiling filter		EU5 grade high-efficiency filtration, produced by Dutch technology, can efficiently capture dust particles larger than 4um, with a capture rate as high as ≥99%. The built-in filter cotton bracket is convenient for replacing filter cotton.
	Floor filter		Multi-layer glass fiber cotton, filter effect > 70%, absorbs dust and particles in paint mist.
Control system	Control panel		Luxury intelligent electronic control system
	Function		Lighting, temperature and time setting, spray painting, constant temperature spray paint, baking paint, emergency stop, fault alarm, etc.
Total power	49KW		Voltage	380V,50HZ,3 phase

LX-D2


Tailored High precision of processed products	Quality Assurance Years of processing and production experience	High quality efficiency Each link has a special person quality inspection supervision

Seiko Manufacturing · Excellent Quality

Five advantages to provide you with a better experience

LX-D2