LX -20-50

Classification:

Automobile painting/paint room consists of painting/paint room, hot air generator, electric control cabinet and other parts. When painting, the two main fans suck in fresh air from the air inlet, first pass through the first dust filter to filter out large particles of dust in the air, and then enter the air chamber at the top of the paint booth, and the air flows through the top filter quilt. Clean and evenly flow downward from the top, forming a wind curtain around the vehicle. Then, the cotton is used to filter out the paint mist and impurities in the painting process, and the air duct is discharged from the floor to the outside. Always maintain a positive pressure in the barn to prevent dust from entering the room.

Key words:

Catalytic combustion equipment | spray paint room | RTO catalytic combustion equipment

Hotline:

0531-83543888/83383888

Online consultation

Related Products

Detailed introduction

Graphic Details

LX-D2

Model:LX-20-50
Function:Car spray paint
Specifications:Standard Edition
Features:CCPC Certification

LX-D2

LX-20-50
Outside size		2015066505600mm (LWH)			Inside size	2000050005000mm (LWH)
Entrance door		Single door with 4 leaves, 40004500mm (WH), color: white, high-strength aluminum alloy profile edging door, the outer side is covered with "Longxiang" special protective film to improve the anti-corrosion and rust resistance and extend the service life, equipped with super-large tempered glass observation window, special luxury giant bolt, square tube guide column, aluminum alloy hinge; sealing slot box with special sealing strip;
Emergency door		2 sets, 6502000mm (WH), color: white, high-strength aluminum alloy profile edging door, equipped with extra-large tempered glass observation window, equipped with pressure lock to prevent the pressure in the room from exceeding the normal value and damaging the baking room, safe and durable.
Main system
Cabin system	Wall panel		The wall is equipped with 4 sets of steel reinforcement ribs in the middle and 4 sets of steel composite beams on the top. It adopts a socket-type flame-retardant EPS composite board, and the outer side is covered with a "Longxiang" special protective film to improve the anti-corrosion and rust resistance and extend the service life. The thickness is 75mm, and the inner and outer δ0.426mm color steel plate; internal filling: flame-retardant EPS foam, bulk density 10 kg. The frame of the room is made of galvanized steel plate, and the surface is sprayed with high temperature plastic, which has good anti-rust and pressure sealing effect.
	Basement		The platform is made of galvanized steel plate laser cutting and assembled with galvanized square tubes. The height is 280mm. The installation is standardized and durable. There are two ground grids and three anti-skid plates in the middle, which is reasonable in structure and durable. The fixed-length steel plate ground grid 30×5 flat steel is used to ensure load bearing, galvanized and anti-rust treatment, and the bottom of the checkered plate is welded with reinforcing ribs; the staff can operate comfortably. 2 sets of ramps, made of 6202000mm (WL) fully sealed tread plate, powder coating with anti-rust treatment.
Ventilation system	Inlet fan		The air supply is equipped with 6 double-inlet centrifugal fans, and the model and parameters of each fan are as follows: model YDW5.6M, power 7.5kw, flow rate 20000m3/h;
	Outlet fan		the exhaust is equipped with 3 double-inlet centrifugal fans, and the fan model and parameters are as follows: model 4-82-7.1E, power: 11kw, flow rate 36000m3/h, belt drive. Small size, large air volume, low noise, small vibration; heat and moisture resistant, durable.
	Cabinet setting type		The fan box is made of spray-coated profiles and steel plates with external protective film to improve corrosion resistance and rust resistance and extend service life; the super-large fan box can fully meet the air intake and exhaust needs of the baking room; the high-position air supply unit greatly improves the air supply efficiency of the fan; the exhaust duct is composed of galvanized plate common plate flange duct made by professional equipment, which is sturdy and durable; it comes standard with 6-section air ducts and 3 elbows, and the single-section size is 900900910mm square.
Heating system	Burner		Equipped with 3sets* Riello RG5S oil burners, with a maximum calorific value of 780,000 kcal/h, and equipped with pneumatic spray and baking automatic conversion dampers. The heat exchanger is made of 1.2 mm thick SUS304 high-quality stainless steel argon arc welding and matched with a large-diameter 65 mm explosion-proof port. It has a reasonable structure, is safe and reliable, has a large heat exchange area, and has a high thermal energy utilization rate. The heat exchange rate can reach 87.1%.
	Heat Exchanger		1.5㎜ thick SUS304 high-quality stainless steel argon arc welding and matching large-diameter 65㎜ explosion-proof port, reasonable structure, safe and reliable, large heat exchange area, high heat energy utilization rate, heat exchange rate can reach 87.1%.
	Cabinet		Rock wool interlayer, thermal insulation, flame retardant
Lighting system	Ceiling lights		26 sets of upper row lights * 4 pieces = 104pcs* 16W lamps,LED high-efficiency energy-saving lamps, galvanized sheet spray-coated light box shell, 3C quality certified tempered glass translucent panel. Illuminance: ≥800LUX.
	Side lights		with 18 sets of 4 pieces = 72pcs* 16W vertical side lights. LED high-efficiency energy-saving lamps, galvanized sheet spray-coated light box shell, 3C quality certified tempered glass translucent panel. Illuminance: ≥800LUX.
Filtering system	Primary filter		G2 grade, filtering effect > 83%, produced by Italian technology, effectively captures dust particles larger than 10um.
	Ceiling filter		EU5 grade high-efficiency filtration, produced by Dutch technology, can efficiently capture dust particles larger than 4um, with a capture rate as high as ≥99%. The built-in filter cotton bracket is convenient for replacing filter cotton.
	Floor filter		Multi-layer glass fiber cotton, filter effect > 70%, absorbs dust and particles in paint mist.
Control system	Control panel		Intelligent electronic control system
	Function		Lighting, temperature and time setting, spray painting, constant temperature spray paint, baking paint, emergency stop, fault alarm, cumulative time, etc.
Total power	85KW		Voltage	380V,50HZ,3 phase


Tailored High precision of processed products	Quality Assurance Years of processing and production experience	High quality efficiency Each link has a special person quality inspection supervision

Seiko Manufacturing · Excellent Quality

Five advantages to provide you with a better experience

LX-D2