LX-6-2

Classification:

The grinding room is a modern sheet metal spraying equipment that meets the construction needs of modern maintenance workshops, improves the working environment of the sheet metal spraying workshop, removes dust, waste gas and paint mist generated during production in the sheet metal spraying workshop, and improves production efficiency. 1. Single-station, double-station or multi-station grinding rooms can be selected; 2. Full-grid upper slope plates with the same width as the grinding room can be selected; 3. The floor of the grinding house can be installed on the flat ground or in the hidden place. 4. The grinding room without floor can be selected. The collection of exhaust gas and dust is filtered by the filter configured on the lower side of the rear and discharged from the workshop. 5. Optional lift configuration.

Key words:

Catalytic combustion equipment | spray paint room | RTO catalytic combustion equipment

Hotline:

0531-83543888/83383888

Online consultation

Related Products

Detailed introduction

Graphic Details

LX-D2

Model:LX-6500
Function:Sanding room
Specifications:Non-standard customized version
Features:Energy saving and environmental protection type

LX-D2

LX-6-2-1
Outside Size	7550×3550×3400mm (L×W×H);
Inside size	6300×3450×2700mm (L×W×H);
Basement	The floor is assembled by galvanized steel plate laser cutting molding and galvanized square tube. It is 280mm high. There are five rows grills，The installation specifications are standardized and durable. Use a fixed -ruler steel plate grille 30 × 4 flat steel to ensure load -bearing and galvanized rust treatment.
Ramps	Two ramps, 6202000mm (WL) full sealing pattern board, powder coating and rust -proof treatment.
Static room size	6400×3550×380mm (L×W×H);
Lighting	Eight groups of upper lights × 4 = 32 20W light tube; galvanized plate powder coating light box housing, 3C quality certification tempered glass high -transmitting panel.
Cabinet	They are made of spraying profiles and steel plates with external protective films, which improves the ability to resist corrosion and rust resistance, and extend the service life.
Air supply system	The size of the cabinet is 1700 × 900 × 3100 mm (L × W × H), and the oversized fans can fully meet the needs of the polishing room exhaust; a 5.5kW YDW inner rotor fan, air volume: 20000m³/h
Exhaust air system	The size of the cabinet is 1300 × 900 × 1500 mm (L × W × H), and the oversized fans can fully meet the needs of the polishing room exhaust; with a 5.5kW YDW series fan, air volume: 15000m³/h, small volume, large air volume, low noise, and small vibration; heat -resistant moisture and durability.
Heating system	With 1 Riello G10 burner. With stainless steel heat exchangers. heat capacity100000kcal/h.
Glass	The light glass is tempered glass.
Filtering system	Primary filter bag, high -level filtration, ground cotton filter is glass shredded; G2 level, filtering effect is 83%, which is the production of Italian technology, effectively capture dust particles greater than 10um, EU5 level efficient filtering, which can be produced in Dutch technology, which can efficiently capture greater than 4um more than 4um The capture rate of dust is as high as ≥99%. The embedded filter cotton bracket is convenient for replacing filter cotton, multi -layer glass fiber cotton, and the filtering effect is> 70%.
Roof	0.6mm galvanized steel roof panels.
Control system	Air fan ,lighting.
Sealing type	3 sides PVC curtain and 1 side wall panels
Installation way	Steel rope hanging or steel pole supporting the roof(Option).
Frequency	380V,50HZ,3ph。
Total power	12.2W

LX-1-3


Tailored High precision of processed products	Quality Assurance Years of processing and production experience	High quality efficiency Each link has a special person quality inspection supervision

Seiko Manufacturing · Excellent Quality

Five advantages to provide you with a better experience

LX-D2