LX-1-3

Classification:

The grinding room is a modern sheet metal spraying equipment that meets the construction needs of modern maintenance workshops, improves the working environment of the sheet metal spraying workshop, removes dust, waste gas and paint mist generated during production in the sheet metal spraying workshop, and improves production efficiency. 1. Single-station, double-station or multi-station grinding rooms can be selected; 2. Full-grid upper slope plates with the same width as the grinding room can be selected; 3. The floor of the grinding house can be installed on the flat ground or in the hidden place. 4. The grinding room without floor can be selected. The collection of exhaust gas and dust is filtered by the filter configured on the lower side of the rear and discharged from the workshop. 5. Optional lift configuration.

Key words:

Catalytic combustion equipment | spray paint room | RTO catalytic combustion equipment

Hotline:

0531-83543888/83383888

Online consultation

Related Products

Detailed introduction

Graphic Details

LX-D2

Model:LX-1-3
Function:Sanding room
Specifications:Non-standard customized version
Features:Energy saving and environmental protection type

LX-D2

LX-1-3
Inside dimension	6300×3450×2800mm (L×W×H)
Outside dimension	7550×3550×3200mm (L×W×H)
Basement and floor	No basement, two rows of pits, 30×4 flat steel grille with fixed-length steel plate to ensure load bearing, galvanized and anti-rust treatment. Pit size: 4610×710mm (L×W).
Ceiling system	6400×3550×380mm (L×W×H), with lights on both sides of the top, filter cotton in the front two-thirds of the middle of the top, and a sealing plate in the rear third;
Generator setting type	Pit exhaust, the fan cabinet is made of sprayed profiles and steel plates with a protective film, which improves the anti-corrosion and rust resistance and prolongs the service life.
Exhaust system	The size of the cabinet is 1300 × 1100 × 1100 mm (L × W × H); the super large fan cabinet can fully meet the exhaust needs of the prep bay. Equipped with a 7.5KW YDW series fan for exhaust air, the air volume is 20000m³/H, small size, large air volume, low noise, low vibration; heat and moisture resistance, durable；electric damper control intake air capacity,electric damper control displacement exhaust volume.
Seal type	Back side set 50mm EPS,other 3 sides with PVC soft curtain,curtain color:upper part:white,middle part:transparent,lower part:blue
Ceiling installation	Steel rope hanging or steel pole supporting the roof(optional)
Ceiling installation	Ceiling filter, glass filter. Ceiling filter, produced by Dutch technology, can efficiently capture dust particles larger than 4um, the capture rate is as high as ≥98%, and the built-in filter frame is convenient for replacing filter cotton; multi-layer glass fiber filter, the filtering effect> 70%, absorbing dust and particles from paint mist.
Lighting system	8 groups × 4 = 32 pieces of 16W; galvanized plate powder coating light box shell, 3C quality certified tempered glass high light transmission panel
Control system	Fan switch,lighting switch and electric damper switch
Voltage frequency	380V,50HZ,3 phase
Total power	8.7KW

LX-1-3


Tailored High precision of processed products	Quality Assurance Years of processing and production experience	High quality efficiency Each link has a special person quality inspection supervision

Seiko Manufacturing · Excellent Quality

Five advantages to provide you with a better experience

LX-D2